In stock > 5 Pcs
2Pcs | 10% | 134,91 kr/Pcs |
3Pcs+ | 15% | 127,41 kr/Pcs |
Hofi UV Glass Pro+ toughened glass protects a significant portion of the rounded screen, has a surface hardness of 9H, so it is extremely scratch resistant even when it comes into contact with sharp objects, and is additionally coated with an oleophobic coating to reduce fingerprints.
The UV model is glued using a liquid substance over the entire surface of the screen, and then the substance is cured using a UV lamp.
This combination results in the ideal effect of smoothness, clarity and responsiveness.
Installation is easy and user-friendly.
Find out how to install: https://www.youtube.com/watch?v=W7uxROE7ywk&feature=youtu.be
* We do not recommend the use of 3D glass without any enclosure.
** We do not recommend using glass if the case overlaps the edges of the screen too much, there is a risk of undermining.
*** The functionality of the in-screen fingerprint reader may be slightly affected if a film or glass coating is installed. The fingerprint reader is not fully fine-tuned for additional coatings.
ASSEMBLY INSTRUCTIONS:
1) Start the installation in the bathroom right after bathing - the steam will absorb all the dust from the atmosphere and you won't be disturbed by the installation.
2) Clean and degrease the screen surface thoroughly, then use a dry cloth to polish it to a shine.
3) Use the ribbon from the kit to tape the speaker.
4) Connect the UV lamp using the Type-C cable to the power source.
5) Pour the liquid down the centre of the unit.
6) Install the glass as evenly as you can, this step can also be corrected before the surface cures when the liquid is on the screen along with the glass.
7) If an air bubble has appeared, use an ATM card and gently push it out of the glass, this action is done before curing.
8) Using a UV lamp, cure the glass along the centre in five places for 15 seconds each and then around the edges for 10 seconds each.
9) Clean the phone of any residual cured glue.
10) If your device has a fingerprint reader in the screen, remember to remove and re-add the fingerprint after installing the screen glass.
11) Enjoy a job well done!
PRODUCT FEATURES:
- 100% Original
- Packaged in original packaging
- 0.3 mm thick tempered glass
- Scratch resistance 9H
- Fitted with oleophobic coating
- Leaves no trace after dismantling
- Dimensions: 157x72mm
Kit contains:
1 x Hofi UV Glass Pro+
1 x UV lamp (without Type-C cable)
1 x glue tube
1 x Installation kit
Do you have experience with this product? Help others to choose.