Slutsåld
| 2st. | 10% | 148 kr/st. |
| 3st.+ | 15% | 139 kr/st. |
Hofi UV Glass Pro+ tempered glass protects a significant part of the rounded screen, has a surface hardness of 9H, so it is extremely scratch resistant even when contact with sharp objects and additionally, it is covered with oleophobic coating, which reduces the amount of fingerprints.
The UV model is glued with the help of a liquid substance over the entire surface of the screen, and then with the help of a UV lamp the substance is cured.
Thanks to such a combination, we get the ideal effect of smoothness, clarity and responsiveness.
Installation is easy and pleasant for the user
Check how to mount: https://www.youtube.com/watch?v=W7uxROE7ywk&feature=youtu.be
* We do not recommend using 3D glass without any casing.
** We do not recommend using glass if the case overlaps too much on the edges of the screen, there is a risk of undermining.
*** The functionality of the fingerprint reader in the screen may be gently disturbed in the case of a film or glass coating installed. The fingerprint reader is not fully refined for additional coatings.
INSTALLATION INSTRUCTION:
1) Start installation in the bathroom just after the bath - steam will absorb all the dust from the atmosphere and it will not interfere with the installation.
2) Clean thoroughly and degrease the surface of the screen, then with a dry cloth, polish it to a flash.
3) With a ribbon from the kit, seal the speaker.
4) Connect the UV lamp with Type-C cable to the power source.
5) Pour the liquid into the very center of the device.
6) Install glass as much as possible, this step can also be corrected before hardening the surface when the liquid is on the screen with the glass.
7) If a bladder with air appeared, use the ATM card and gently push it outside the glass, we do this action before hardening.
8) With a UV lamp, harden the glass along the center in five places for 15 seconds and then at about edge after 10 seconds.
9) Clear the phone from the remnants of hardened glue.
10) If your device has a fingerprint reader in the screen, be sure to remove and re-add the fingerprint after installing the glass to the screen.
11) Enjoy the job well done!
PRODUCT FEATURES:
- 100% Original
- Packed in original packaging
- Tempered glass with a thickness of 0.3mm
- Scratch Resistance 9H
- Equipped with oleophobic coating
- After dismantling leaves no trace
- Dimensions: 158x73mm
Set includes:
1 x Hofi UV Glass Pro+
1 x UV lamp (without Type-C cable)
1 x Tube with glue
1 x Installation Kit
Har du erfarenhet av den här produkten? Hjälp andra att välja..